|
|
|
Published : January 04, 2012 |
Author : andyauto
Category : Automotive | Total Views
: 25 | Unrated
|
|
|
|
Some motorists have complained that he had to frequently replace the clutch plates are quickly depleted, whereas the lag time according to a recent replacement of the clutch plates. Of course with frequent change clutch plate means you have to spend more money. According to experience, one of the most common cause of rapidly ending the clutch plate is an ordinance of driving a vehicle that is less good. The following will be explained thoroughly how to care for and use the clutch properly:
A. Working Principle Clutch. When the clutch pedal is pressed, the relationship between the machine with the drive system (transmission) is lost, because the flywheel and plate / clutch disc does not touch each other so that the energy produced by the machine can not be forwarded to the drive components. Then, when the clutch pedal is released or not trampled on (enabled) then the delivery will again drive the engine speed transmission.
B. Use of False. Often you do not know actually there are some things that made the clutch components prone to damage:
1) Putting the foot on the clutch pedal during vehicle running. It can accelerate wear and tear on the release bearing and plate / clutch disc,
2) Holding the clutch when the car half a queue on the ramp. This can speed up damage to the clutch system. The engine often feels vibrating rubber backing that makes the function of the engine (engine mounting) can also be disrupted. We recommend using the handbrake to hold the vehicle while it is queued on the ramp;
3) Stepping on and popped the clutch roughly. When done in a way that rough touch of the plate / clutch disc against the flywheel will feel harder, this will accelerate the wear of the clutch system.
C. Correct usage. To be able to function with perfect coupling is often not easily damaged, then the following stages of the use of couplings are recommended:
1) If you step on the clutch pedal, then press the clutch pedal completely. The aim is that the flywheel and plate / clutch disc can be completely separate, so as to facilitate the move the transmission lever;
2) When was the clutch completely, move the transmission lever,
3) After moving the transmission lever, then release the clutch slowly stamping in sync with the stamping on the accelerator so that vehicles can run smoothly and not make the vehicle jump.
D. Clutch Care Tips.
1) Conducting regular clutch checks,
2) Always use first gear to start early because if you use the vehicle on top gear, the ACT Clutch, ACT Flywheel will be burdened with excessive and accelerated wear and tear;
3) Neutralize the transmission lever if it stops. For example when you are on a red light. |
|
|
 Visitor's Comments |
|
|
|
Subscription |
| Subscribe now and receive free articles and updates
instantly. |
|
|
|
|
Statistics |
| Total Articles |
90671
|
| Total Authors |
13747
|
| Total Views |
2210521
|
| Total categories |
62
|
|
